|
|
Post by azimov16 on Apr 22, 2019 22:17:10 GMT
as of the last update I cannot change the FOW on the cabri it just willnot stay @ 105 but reverts back to normall I have tried all my other aircraft and they are OK Just the Cabri Cheers
|
|
|
|
Post by VSL-Admin on Apr 22, 2019 23:31:51 GMT
as of the last update I cannot change the FOW on the cabri it just willnot stay @ 105 but reverts back to normall I have tried all my other aircraft and they are OK Just the Cabri Cheers
Hi  The Cabri is featuring an auto-updater plugin. Can you be more specific in what you are trying to do so I will be able to assist you? Thanks! |
|
|
|
Post by bulldozer on Dec 31, 2020 0:41:06 GMT
Hi,
since I downloaded the latest update the governor is stuck in off position and oil temperature is stuck at 53 degrees hence there is no throttle, RPM is stuck on idle and hence aircraft cannot be flown. How can this be rectified?
|
|
|
|
Post by bulldozer on Dec 31, 2020 1:01:49 GMT
Hi Since the latest update my Cabri G2 is inoperative as the Gov is stuck off and oil temp is out of the green range at 53 degrees. How can this be rectified ? Cheers, Bulldozer |
|
|
|
Post by VSL-Admin on Dec 31, 2020 6:41:20 GMT
Hi Since the latest update my Cabri G2 is inoperative as the Gov is stuck off and oil temp is out of the green range at 53 degrees. How can this be rectified ? Cheers, Bulldozer Hi there! As was mentioned in the release notes, and as specified in the included instruction files (inside the POH folder), several assignments were changed in order to get better and more realistic simulation experience... You need to assign your throttle to the 'wing sweep' axis. In v2.0 the governor kicks in when the switch is set to ON, and when the engine RPM exceeds the governor's threshold, similar to how it works in real world. Let me know if you need further assistance!  |
|
