|
Post by VSL-Admin on Jul 19, 2019 11:13:46 GMT
Just bought the EuroFOX and really like it. But on the few test flights I’ve done there is a pronounced tendency to bank to the left needing constant yoke pressure to correct. My control work fine with the C172-REP. Am I missing some bit of config or set up or is this how it is. A bit difficult to control and very tiring on a flight lasting more than a few minutes. Malcolm Hi Malcolm Thank you for your feedback! Banking forces during flight may be related to several reasons; engine torque is one of the reasons, as well as trim. Please verify that you are *not* flying the EuroFOX in the experimental flight model environment (uncheck this feature in X-Plane general settings, and reload the aircraft). In addition, when flying with full power, engine torque forces may induce the roll moments, so once possible, try to set the engine in lower RPM, suitable for cruise speed. Another aspect is trim. You can assign your joystick hat switch with ailerons trim, in addition to pitch trim. For long flights, you may also use the built in autopilot, which will keep the selected attitude. If all of the above did not help you to resolve this, let me know! In anyways, I am listing your input for further checkup!
|
|
|
Post by bmathieu on Nov 4, 2019 18:37:45 GMT
Hi all I just purchased the VSKYLABS EuroFOX Project AU Build 5.3a. It's a great modelised airplane. Great Job ! I fly in Europe. Do you know how to change the panel from MPH to KMH ? Thanks for your answer Benoit
|
|
|
Post by VSL-Admin on Nov 4, 2019 18:47:39 GMT
Hi all I just purchased the VSKYLABS EuroFOX Project AU Build 5.3a. It's a great modelised airplane. Great Job ! I fly in Europe. Do you know how to change the panel from MPH to KMH ? Thanks for your answer Benoit Hi there! To toggle between mph to kph, just click on the Air Speed Indicator edges/plate. There is an online POH page - a recommended read. Here is the link: www.vskylabs.com/vsl-aeropro-eurofox/vsl-eurofox-pohLet me know if you need further assistance! 😎
|
|
|
Post by bilik01 on Dec 9, 2019 18:21:22 GMT
After the Icon A5 and the Rutan I just purchased the VSKYLABS EuroFOX. It is a wonderful airplane/project but so are the others. The Icon is fun. The Rutan is very easy to fly for an ex glider pilot but challenging as you like. With the EuroFOX i can take off from a rough glider airstrip, very near my own house in the Netherlands. The EuroFOX is easy to handle and fun to fly. A perfect buy, and a very nice project.
I really apreciate VSKYLABS for the using a female pilot (just like in the Icon and the co-pilot in the Rutan), role-breaking. I'm looking foreward to the update.
|
|
|
Post by beriev on Sept 7, 2023 2:01:12 GMT
Hello everyone, I wanted to make a suggestion to add to the model you have of Eurofox, if possible you could add a change of revolutions to the engine since in the real model you can raise and lower power by moving the lever and by turning the wheel of the lever you can raise or lower engine revs, it would be of great help to me and it would be more realistic since I just acquired the model for X-plane 11 to use for training since I use it on airplanes in real life, I don't know if it will be possible to add it also the version of X-plane 11
|
|
|
Post by VSL-Admin on Sept 7, 2023 18:26:37 GMT
Hello everyone, I wanted to make a suggestion to add to the model you have of Eurofox, if possible you could add a change of revolutions to the engine since in the real model you can raise and lower power by moving the lever and by turning the wheel of the lever you can raise or lower engine revs, it would be of great help to me and it would be more realistic since I just acquired the model for X-plane 11 to use for training since I use it on airplanes in real life, I don't know if it will be possible to add it also the version of X-plane 11 Hi there and thank you for reaching out! This feature is already on the list for future implementation. It will however, be update only in the X-Plane 12 version.
|
|