|
Post by kamow52 on Feb 2, 2018 23:59:08 GMT
Hello VSKYLABS-Team, my problems with the Falke: 1. On every flight I have a kind of "hum", like from the engine over the scenery, even when the hawk's engine is not started. 2. The beacon switch is not functional, I have to start the Beaconlight with a key command. Thanks and best regards Arndt
|
|
|
Post by VSL-Admin on Feb 3, 2018 0:34:27 GMT
Hi Humming sound should be the gyro or the electrical prime/fuel pump. These are making noise even though the engine is off. Try to pull out the battery CB or to switch the main power switch off and see if it continues. Anyways, I'll check it out to see if some volume tuning is needed for the electric system "humming". All light switches should work properly. Please try to load the plane after restarting X-Plane, and/or see if that happens after using other aircraft (payware). The lights in the Falke are the default X-Plane lights, so it should work without any issues (tested). Please let me know if you are still having this issue, so I will be able to know if further checks should be made (conflicts with external plugins etc...). Thanks! JetManHuss.
|
|
|
Post by kamow52 on Feb 3, 2018 9:44:06 GMT
1. I start Xplane, start a new flight, all switches are off: the Humming is available, even in all views from the outside on the Falke! After closing the hood quieter. 2. The beacon switch does not work.
|
|
|
Post by VSL-Admin on Feb 3, 2018 10:39:48 GMT
Hi ok...just re-tested your report issues. Beacon light did have an issue when starting in cold and dark only. It was just fixed for the upcoming update! Humming noise: Started cold and dark. From in cockpit and outside. closed and opened cockpit. complete silence. Once you set the power switch off (while the battery CB is pushed IN): the electric gyro start spinning and makes the "humming". You can hear it from inside the cockpit but also from outside the cockpit, if you are close enough to the aircraft. If the Battery CB is pushed in and the power switch is turned on: the primer CB and the Fuel pump CB, if pushed IN...will induce their own "humming" sounds (if you are close to the aircraft, you will hear it also). When switching off this equipment, including the battery when needed, silence is back gradually, as the gyro spins off. The Variometer volume knob has a known issue as it is also affecting interior sounds and it will be also fixed for the upcoming update. Upcoming update is expected within a few days. It is a minor fixes update for these issues and VR operation tuning for the throttle and parking brake. Thanks for your inputs!
|
|