|
|
Post by wacoboy on Feb 6, 2018 17:42:27 GMT
Where do I find help on connecting an RC controller to a Windows desktop for use with X-Plane?
|
|
|
|
Post by VSL-Admin on Feb 6, 2018 17:51:36 GMT
Hi  It is straight forward and quite simple! You need to connect the USB controller as if it was a regular joystick. Then, you will have to go to X-Plane's joystick settings menu and calibrate it. Right after, you should assign the sticks to their needed axis. example: left stick aft/forward = throttle. left stick left/right = yaw (rudder). right stick left/right = roll. right stick aft/forward = pitch. Some of the axis may need a reversal (simply hitting a checkbox). To set the switches on the controllers (if it is a 6CH then you have two of them, for flaps and gears, or whatever needed). In this case, you will need to use a switch, locate it on the screen and choose what it will do. If it is a two way switch - you may need to set it with up="gears up", down = "gears down"...and the same with the flaps. Some switches are toggle switches. I hope it was helpful! JetManHuss- VSKYLABS |
|
|
|
Post by wacoboy on Feb 9, 2018 17:52:54 GMT
Thank you, will give this a try!
|
|
