osi
New Member
Posts: 1
|
Post by osi on Jan 17, 2019 21:03:29 GMT
Hi all,
Is it possible to use the throttle with the controls? At the moment it looks like that it does not work. I set my throttle on the controls to "throttle" in the settings but I can only adjust the throttle with the mouse at the moment. On a R22 it works well.
Any ideas? Many thanks for your help!
Always happy landings,
Olaf!
|
|
|
|
Post by VSL-Admin on Jan 18, 2019 0:17:31 GMT
Hi there! The throttle should work when the governor is not switched on. Unlike the real Cabri, in the current version of the project, the VSKYLABS Cabri's throttle cannot be operated manually while the governor is engaged (in real life the governor "kicks in" during manual operation over a certain RPM value, even when turned on...allowing manual control while it is on). However, when using the mouse manipulation it may override the governor (X-Plane's issue), although not really working as the RPM will get back to the governor's RPM value once intact. So, in order to use manual throttle along the flight, the governor needs to be turned off...This mode of operation may change in the future, depending on X-Plane's evolving default system algorithms (the project is utilizing X-Plane with it's default features and without custom made systems, coding etc...). Hope that this is helpful. Thank you for reaching out! JMH  |
|
|
|
Post by loveawake.ru on Mar 5, 2022 11:16:32 GMT
Welcome to the world of adult Dating loveawake.ru
|
|
|
|
Post by loveawake.ru on Mar 5, 2022 11:17:26 GMT
Welcome to the world of adult Dating loveawake.ru
|
|
|
|
Post by loveawake.ru on Mar 5, 2022 11:18:22 GMT
Welcome to the world of adult Dating loveawake.ru
|
|
