|
Post by checkyourmirrors on Dec 13, 2020 0:32:04 GMT
I am trying to make a Gauges Panel for the R44 via Air Manager and looking understand the Dataref for your R44 and I've been trying the below and hoping you've got some guidance?
xpl_dataref_subscribe("R44/ConsoleGages", "FLOAT[10]", data_xpl)
xpl_dataref_subscribe("R44/Instrument/Brightness", "FLOAT", set_Light)
|
|
|
Post by VSL-Admin on Dec 17, 2020 8:18:32 GMT
I am trying to make a Gauges Panel for the R44 via Air Manager and looking understand the Dataref for your R44 and I've been trying the below and hoping you've got some guidance? xpl_dataref_subscribe("R44/ConsoleGages", "FLOAT[10]", data_xpl) xpl_dataref_subscribe("R44/Instrument/Brightness", "FLOAT", set_Light) Hi there! The VSKYLABS R44 is making use of the default X-Plane 11 datarefs, with not custom datarefs being used. Let me know exactly what you are missing and I will try to assist you!
|
|
|
Post by checkyourmirrors on Dec 21, 2020 1:05:08 GMT
Do you have a list of the datarefs the R44 is using? I have to guess on some of the like alternator which I got figured out but others are not so obvious. So far I’ve been able to piece together and modify or build and I’m not sure which datarefs are used for the: 1) Fuel Pump warning light 2) Engine Fire warning light 3) Fuel Filter warning light 4) Cylinder Hear temp gauge 5) Clock - X-Plane has a fairly obvious datarefs however what X-plane is pushing out is a completely different time that what shows on your cockpit clock. Attachments:
|
|
|
Post by VSL-Admin on Dec 21, 2020 7:33:06 GMT
Do you have a list of the datarefs the R44 is using? I have to guess on some of the like alternator which I got figured out but others are not so obvious. Hi there! No special datarefs are needed, as all switches are making use of default key/buttons assignments. The non-obvious ones are specified in the included manual/Essentials pdf files, which can be found in the POH folder. Let me know if you need specific assistance!
|
|
|
Post by checkyourmirrors on Dec 21, 2020 16:32:22 GMT
I checked out the PDF and see my previous post, I edited it before I saw your reply and I gave specific examples of the datarefs. I’m working on the ignition key now and the Puma rig will hopefully be here tomorrow and my plan is to use a touchscreen monitor given how big the panel is since it cover mostly the full instruments.
I’ve resolved the issues from above by searching through the dataref plug-in along with trial/error. I am stuck on the Dataref for flipping the Clutch Guard/Red Cover if you know what that is. Also I couldn’t find any switch graphics that look like the real thing for ALT, STROBE, NAV, MASTER BATT if you have those.
|
|
|
Post by checkyourmirrors on Dec 26, 2020 18:24:13 GMT
Continued Progress....
|
|