|
|
Post by carlito on Jan 7, 2021 4:28:46 GMT
Hi,
First of all, thank you very much for this beautiful helicopter, I love to fly it.
Since last update v2, when I push the collective down, the helicopter is descending very slowly. At 15percent power I'm still maintaining very low rate of descent, and approaching the ground the helicopter fall quikly.
Any idea ?
Thank you in advance
|
|
|
|
Post by VSL-Admin on Jan 13, 2021 8:47:52 GMT
Hi, First of all, thank you very much for this beautiful helicopter, I love to fly it. Since last update v2, when I push the collective down, the helicopter is descending very slowly. At 15percent power I'm still maintaining very low rate of descent, and approaching the ground the helicopter fall quikly. Any idea ? Thank you in advance Hi there! and thanks for your feedback! Your report was not confirmed; reducing collective fully down during flight will result with excessive sink-rate. Now, depending on your flying weight....with 15% torque, (depending on your maintained airspeed as well), the helicopter descents firmly, with sink rate which will get higher as you are slowing down. During the slow-down, at around airspeed that is less than ~40 knots, sink rate will get higher, and will gradually increase to way above 1000 feet per minute (accompanied with a higher slow-down up to vertical descent). You did not specified flying conditions (weight, speed, outside air temperature, density altitude), but all is looking as expected...  |
|
