R44 with the latest PUMA X slow flight and landing issues

I am writing again as this model continues to have issues. I truly thought this was solved. The aircraft needs near-full left pedal just to pick up to a hover. I have calibrated the PUMA X several times... once even completely resetting the PUMA X from scratch.

Some notes:

1. Anti-torque pedals not very responsive.
2. Flys relatively well in cruise and then seems "out of trim" yawing right. With right pedal corrections to center the ball, the aircraft increases in speed. When I try to slow it down by lowering collective and adding right pedal, the manifold pressure drops off suddenly.
3. On approach to landing, during any flare, the airspeed bleeds off too quickly and it drops to the surface.
4. I had complained before about rotor overspeed and I have not been getting that issue lately or at least infrequently.
5. Both the simulator owner and myself fly the R22 and R44 in real life and we both agree there is something wrong with the model.

I suggest we have a video conference or I try to record what is happening?

Is there an update of the flight model since my purchase?
Order number: 1706283
Order Date: 10/24/2022

Troubleshooting... I switch aircraft. I have multiple models including the R22 and Cowansim Bell 206B3; Cessna 150 and all of these models are very stable.

Also, this is not a complaint. We want to be part of the solution. The model is great, just maybe we have found some issues that will benefit all users. Thank you

Hello, I have all the same issues that samscloud reported above. I fly the R44 regularly. The sim acts more like a drunken bucking bronco than a helicopter. I’m running x-plane 12.

Yes, the Puma X. Chris from proflightsim sent a new board that corrected some issues. I just can’t get the simulator
To fly like a real R44. I think the biggest issues are with the collective.

Are there sensitivity templates for proven starting points

Thanks! Jim