|
|
Post by helisimhangar on Apr 23, 2024 7:43:31 GMT
Greetings
I try to add real switches to XPlane using SimInnovations. For some reasons this works fine with all dataref_write that have a variable with an array like INT[8]. But all switches with a simple INT do not have any effects.
SimInnovations blames this on the integrations from VSKYLABS as the code works fine.
I want to ask if anyone has here some experience and advice or knows if something on the VSKYLABS-side has changed.
Thanks very much in advance
Michael
|
|
|
|
Post by VSL-Admin on Apr 24, 2024 21:15:02 GMT
Greetings I try to add real switches to XPlane using SimInnovations. For some reasons this works fine with all dataref_write that have a variable with an array like INT[8]. But all switches with a simple INT do not have any effects. SimInnovations blames this on the integrations from VSKYLABS as the code works fine. I want to ask if anyone has here some experience and advice or knows if something on the VSKYLABS-side has changed. Thanks very much in advance Michael Hi Michael, Please be more specific (please refer to specific datarefs that you are experiencing issues with). |
|
|
|
Post by helisimhangar on Apr 25, 2024 15:02:37 GMT
Could you provide the variables to which the warning lights are assigned ? I try all possibilities, but there are too much of them. And the BARC and Cluth lights please. (Switch is documented)
Thanks in advance
Michael
|
|
|
|
Post by helisimhangar on Apr 26, 2024 5:12:04 GMT
Greetings I try to add real switches to XPlane using SimInnovations. For some reasons this works fine with all dataref_write that have a variable with an array like INT[8]. But all switches with a simple INT do not have any effects. SimInnovations blames this on the integrations from VSKYLABS as the code works fine. I want to ask if anyone has here some experience and advice or knows if something on the VSKYLABS-side has changed. Thanks very much in advance Michael Here's the answer from VSKYLABs in case anyone else needs the info: Hi Michael, Please continue discussion in this thread and not the other one so there will be no duplicates. Position lights in the VSKYLABS G2 are using the default datarefs. For example: Navigation lights are using sim/cockpit2/switches/navigation_lights_on Landing light is using sim/cockpit2/switches/landing_lights_on All assignments are specified in the 'ESSENTIALS' pdf file and since all datarefs are the default ones (no customized stuff), it should all work out of the box without any issues. *For the strobe switch - there is a typo in the 'ESSENTIALS' file and it should be activated using: sim/cockpit2/switches/beacon_on ...instead of the strobe one. For the landing light you can use the sim/cockpit2/switches/landing_lights_switch[0] - it should work as well. But for the navigation lights - there is no other dataref (than specified above)... Let me know if you need further assistance! |
|
|
|
Post by VSL-Admin on Apr 28, 2024 9:50:28 GMT
Could you provide the variables to which the warning lights are assigned ? I try all possibilities, but there are too much of them. And the BARC and Cluth lights please. (Switch is documented)
Thanks in advance
Michael Hi Michael, The project is undergoing an extensive update which is aimed for release during May 2024. There will be some re-wiring of systems including the lights. When it will be released, I will follow up with the list.  |
|
|
|
Post by helisimhangar on Apr 29, 2024 13:46:46 GMT
Thanks for the info. Have most of it already handled, but some still difficult like BARC and some worning light where attribution is difficult to find. Waiting for your update.
|
|
