|
Post by sqbltz on May 21, 2017 13:12:50 GMT
great plane!!!
is there a clist.txt?
thanks AS
|
|
|
Post by VSL-Admin on May 21, 2017 13:50:18 GMT
Hi! v002.0 will be ready soon! Checklists will be available soon too (in one of the future updates after v002.0). Thanks
|
|
|
Post by VSL-Admin on May 22, 2017 12:58:56 GMT
|
|
|
Post by jaggo82 on May 22, 2017 16:49:04 GMT
Fantastic and earlier than expected. Textures look great now and the improve cockpit lighting is a lot better. Will take her out for an intense flight in a few hours...
|
|
rick
New Member
Posts: 1
|
Post by rick on May 22, 2017 23:02:46 GMT
This Tecnam Model was working well until the 2.0... It now seems to take all the color out of X-Plane 11 with a view of the aircraft and just white for scenery. I will look further to make sure I am not running something else that may cause this issue, but so far none of my other aircraft have had this issue.
|
|
|
Post by VSL-Admin on May 23, 2017 4:13:22 GMT
This Tecnam Model was working well until the 2.0... It now seems to take all the color out of X-Plane 11 with a view of the aircraft and just white for scenery. I will look further to make sure I am not running something else that may cause this issue, but so far none of my other aircraft have had this issue. Thanks for reporting! I can't find any reason, other than the fact that I used the 'prefill' feature in this version. I'll check it out and during tomorrow (wed) where another update is scheduled to be released,I'll include a fix, if needed. You are the only one to report such issue, but because I understand that v001.1 works well to you while v002.0 is causing this artifact,it may be related to this issue. Thanks for reporting
|
|
|
Post by aeropictor on May 23, 2017 6:39:34 GMT
I would like to buy the Tecnam, but it looks like my system is not supported. I have an iMac 3,4 GHz Intel Core i7, 16GB Ram and a AMD Radeon HD 6970M 2048 MB. I can run XPlane 10 and 11 with even heavy models like the Carenado Embraer Phenom. Would you think I can do the buy without worry? Appreciate very much all your models …
|
|
|
Post by jaggo82 on May 23, 2017 8:15:28 GMT
v002.0 is a large step forward. For me engine performance is still odd. I can't get here to the projected cruise speeds, referred in the POH at max take-off weight. I need to push way over 30 MAP at 2060 RMP to get here close to 125 KTAS. She should be almost 10 knots faster at arpound 26.8 MAP One thing for the GPS knobs. Can you add a scroll wheel manipulator to the knobs or at least allow to have a continuous rotation, as long as left mouse click is being held?! Tuning in frequencies can be a lot of clicking at the current state.
|
|
|
Post by VSL-Admin on May 23, 2017 8:47:12 GMT
I would like to buy the Tecnam, but it looks like my system is not supported. I have an iMac 3,4 GHz Intel Core i7, 16GB Ram and a AMD Radeon HD 6970M 2048 MB. I can run XPlane 10 and 11 with even heavy models like the Carenado Embraer Phenom. Would you think I can do the buy without worry? Appreciate very much all your models … Hi aeropictor! All of my models are quite modest in terms of PC power requirements (give or take...). The VSKYLABS Tecnam P2006T is especially low on demands on the system, so I guess that it will work for you. In any case, you (and everyone else) can buy all of my models without worries; when something is not working or compatible for any reason, I refund. (I recommend you to read the VSKYLABS store FAQ at: www.vskylabs.com/p/store-faq.html). Thanks
|
|
|
Post by VSL-Admin on May 23, 2017 8:52:12 GMT
v002.0 is a large step forward. For me engine performance is still odd. I can't get here to the projected cruise speeds, referred in the POH at max take-off weight. I need to push way over 30 MAP at 2060 RMP to get here close to 125 KTAS. She should be almost 10 knots faster at arpound 26.8 MAP One thing for the GPS knobs. Can you add a scroll wheel manipulator to the knobs or at least allow to have a continuous rotation, as long as left mouse click is being held?! Tuning in frequencies can be a lot of clicking at the current state. Hi! v001.1 was focused on phase#1 of performance tuning. v002.0 update was not focused of performance and handling at all. The next upcoming update is all about performance (and some more stuff). The performance will be tighten up in most of the flight envelope regime, including cruise and single engine operations. I hope I will get it done in couple of days. GPS knobs improvements - I'm noting yours and others remarks/requests, I will implement it no too far ahead I really appreciate your feebback and notes!
|
|
|
Post by jaggo82 on May 23, 2017 11:39:37 GMT
v002.0 is a large step forward. For me engine performance is still odd. I can't get here to the projected cruise speeds, referred in the POH at max take-off weight. I need to push way over 30 MAP at 2060 RMP to get here close to 125 KTAS. She should be almost 10 knots faster at arpound 26.8 MAP One thing for the GPS knobs. Can you add a scroll wheel manipulator to the knobs or at least allow to have a continuous rotation, as long as left mouse click is being held?! Tuning in frequencies can be a lot of clicking at the current state. Hi! v001.1 was focused on phase#1 of performance tuning. v002.0 update was not focused of performance and handling at all. The next upcoming update is all about performance (and some more stuff). The performance will be tighten up in most of the flight envelope regime, including cruise and single engine operations. I hope I will get it done in couple of days. GPS knobs improvements - I'm noting yours and others remarks/requests, I will implement it no too far ahead I really appreciate your feebback and notes! Great! This one is gonna be one of my most beloved aircraft ever since... Looking forward to anything to come along.
|
|
|
Post by iced07 on May 24, 2017 5:52:33 GMT
Hi from Greece, I'm very enthusiastic with this aircraft and most from the developer and of his support(i have eurofox too). I have the latest version and I see shadows with waves on edges. And one thing more is that can't see number on vs mode when use autopilot. Thanks
|
|
|
Post by VSL-Admin on May 24, 2017 7:53:27 GMT
Hi from Greece, I'm very enthusiastic with this aircraft and most from the developer and of his support(i have eurofox too). I have the latest version and I see shadows with waves on edges. And one thing more is that can't see number on vs mode when use autopilot. Thanks Hi! Here is a copy of what I wrote in Facebook, for others to see: Hi! wavy shadows is X-Plane's out-of-the-box issue...when checking the 'Draw shadows on scenery" checkbox in the Graphics settings window, the shadows become wavy (or with "blocks"). Try to un-check it and you will see the the shadows gets better...but then you don't have the 'global shadows' on the scenery. There are several ways to fix it, if you want to tweek X-Plane...I don't remember right now where I saw it, but when I'll have time I'll post it here (you can search google also).
Regarding the autopilot - it is known issue - posted in the project's page under Autopilot notes. I'm using X-Plane's default S-TEC 55 autopilot, which doesn't include the vs values, although by clicking and dragging the knob you can set it up in values of -1000 to +1000 feet per minute. I will include the numbers down the road so it could be seen. Thanks for the useful inputs
|
|
|
Post by jaggo82 on May 24, 2017 18:05:20 GMT
v002.1 hits the spot on engine performance quite well. It's only a tiny bit off, lets say 2-4 knots slow. But that's brilliant already and within the margin. Thank you. Tested it just the last hour in various weights and heights. Well done.
During my test I see that throttle response (spool up time) is quite long now. Throttle was reacting very fast on v002.0. Is that normal now? Getting used to it after a bit, but just curious about it.
Another sight here is the needle on the MAP gauge. It's hard to read current MAP as the needle is a bit too short. Is it possible to make it a bit longer, getting closer to the scale marks?
Ground braking is perfect now. Holds it there where it should be. And sounds are getting better and better... Really nice.
Very nicely crafted update. All thumbs up!
Regards
Jakob
|
|
|
Post by VSL-Admin on May 24, 2017 18:49:53 GMT
Hi Jakob, Thank you for posting your observations. Getting the plane into the plausible margins of the various flight envelope regimes is a Sisyphean task but I'm very pleased with the current result. There will be additional tunings, but the major part is behind me Engine spool up - I'll have another look into it. I may have defined it on the slow side...will check it out. MAP needle - it is currently modeled based on the authentic one, but I'm opened to reasonable modifications. I will check it out also. I prefer to keep it as authentic as possible though...but I'll have a second look! Great inputs (as always) Thanks!
|
|