demos
New Member
Posts: 9
|
Post by demos on Nov 28, 2017 18:15:28 GMT
I just updated my x-plane 11 to 11.10r1 When I go onto my P 200 GT G1000 program I get the following:
"BE ADVISED
There was a problem loading the navigation equipment of this aircraft
Aircraft/Laminar Research/V11 VSL. Tecnam P2006T-G1000 v4/VSL P2006T-G1000.acf
The G1000 PFD display unit is assigned to a different electrical bus than the EFIS-1 bus bit. This can lead to a discrepancy between panel instruments and popup windows when it comes to failures or power-off situations.
Check the bus assisgnment of the G1000 PFD instrument both in 2nd panel and 3d cockpit objects against the bus bit you set in Plane Maker, Systems, Bus 2."
Any idea what this means??? Thanks
|
|
|
Post by VSL-Admin on Nov 28, 2017 18:21:03 GMT
I just updated my x-plane 11 to 11.10r1 When I go onto my P 200 GT G1000 program I get the following: "BE ADVISED There was a problem loading the navigation equipment of this aircraft Aircraft/Laminar Research/V11 VSL. Tecnam P2006T-G1000 v4/VSL P2006T-G1000.acf The G1000 PFD display unit is assigned to a different electrical bus than the EFIS-1 bus bit. This can lead to a discrepancy between panel instruments and popup windows when it comes to failures or power-off situations. Check the bus assisgnment of the G1000 PFD instrument both in 2nd panel and 3d cockpit objects against the bus bit you set in Plane Maker, Systems, Bus 2." Any idea what this means??? Thanks Hi Yes. It is related to an internal electrical system issue. It is meaningless in normal flight operations. ...and...it was fixed already with a version v4.1a for the G1000 variant. It you have purchased it via the .org store, simply re-download it. If you have purchased it via the VSKYLABS store, it will be available within an hour or so. Log into your account and re-download. An update email with download link will be send to all buyers soon.
|
|
demos
New Member
Posts: 9
|
Post by demos on Nov 29, 2017 13:51:28 GMT
Thank you, I'll do that.
|
|
demos
New Member
Posts: 9
|
Post by demos on Nov 29, 2017 14:23:27 GMT
Just downloaded the V4.1a and everything looks good. It did eliminate the discrepant reference, however as you mentioned, I do not see any difference in normal flight operations. Again, thank you for your assistance.
|
|
|
Post by belgeode on Jan 14, 2018 19:12:31 GMT
Howdy folks. I just got the Tecnam version 4.2, and so far it works well in VR. I have only noticed that from inside I cannot close the doors if i open them. Other than that, the switches for ignition above don't highlight green when "moused over" by the Oculus Touch. (To be honest, I do not remember if I could manipulate them with the mouse also). Needless to say, my controller vibrates like they can be manipulated, but I cannot.
Chronometer also appears to not be able to be touched. (I often change from zulu time to local) Dome lights above don't appear to be functional, but I am testing at 1 PM local, so that could have something to do with it.
G1000 functionality is fine. I have not tested the analog version yet.
FPS is also pretty stable. Nicely done on the textures and reflections. I am going to have to try my hand at making some custom liveries for this bird.
So far aside from those items noted above, the Tecnam looks and FEELS find in VR. Its performance at high altitude airstrips is realistic. (I am in Papua currently on top of a mountain)
If i notice anything else, I will add to this.
Bel Geode.
|
|
|
Post by VSL-Admin on Jan 14, 2018 20:08:35 GMT
Howdy folks. I just got the Tecnam version 4.2, and so far it works well in VR. I have only noticed that from inside I cannot close the doors if i open them. Other than that, the switches for ignition above don't highlight green when "moused over" by the Oculus Touch. (To be honest, I do not remember if I could manipulate them with the mouse also). Needless to say, my controller vibrates like they can be manipulated, but I cannot. Chronometer also appears to not be able to be touched. (I often change from zulu time to local) Dome lights above don't appear to be functional, but I am testing at 1 PM local, so that could have something to do with it. G1000 functionality is fine. I have not tested the analog version yet. FPS is also pretty stable. Nicely done on the textures and reflections. I am going to have to try my hand at making some custom liveries for this bird. So far aside from those items noted above, the Tecnam looks and FEELS find in VR. Its performance at high altitude airstrips is realistic. (I am in Papua currently on top of a mountain) If i notice anything else, I will add to this. Bel Geode. Hi there! Thank you for your feedback! all user reports are being noted for evaluation! This project is under constant development, but let me refer to your inputs: Doors - simply click on the door from the cockpit - it is a toggle mechanism. If you can't operate them make sure you don't have any conflict with your speed-brakes setup in your joystick or through other setup. Ignition switches click-zones are partially visible while mouse-over - known issue - will be further developed as we go. They are manipulated through mouse and controller, but they are not turning "green". As said, it is under development for the next cut (pretty soon). When you have time, Please let me know if you still can't operate the ignition switches with your controllers.Chronometer - request noted Dome lights above - not defined (yet) to be lighted. In the do-list. Thanks again for your useful inputs! the next update should be ready within two weeks or so JetManHuss.
|
|
|
Post by nitrogen on Sept 15, 2018 11:34:06 GMT
Hello everyone,
I'm new to the forum and I'm a real pilot on the P2006, on my P2006 there's the HSI. Now I ask you if you intend to insert it in the cockpit?
Thank you
|
|
|
Post by VSL-Admin on Sept 19, 2018 19:17:53 GMT
Hi, Current avionics will stay in the near future. However your request was just noted Thanks for reaching out! JMH - VSKYLABS
|
|
|
Post by henrikthg on Sept 26, 2018 19:59:34 GMT
Question.. why is it model with engine controls in the wrong order ? Left to right: Throttle - carb. heat - props..
All the P2006T I have been flying in real life... have this setup !!! Left to Right: Throttle - Props - carb. heat...
also autopilot is not in the garmin1000 på a separate unit. placed a the glare panel...
regards Henrik
|
|
|
Post by VSL-Admin on Sept 28, 2018 5:50:41 GMT
Hi Henrik, The VSKYLABS P2006T was modeled with a real P2006T as a reference..one eith the same configuration. There are older models of the P2006T that were configured this way. (You can google it to find photos of such configurations, also several POH versions are including it along with the cockpit drawings). As for the autopilot - the VSKYLABS uses X-Plane's G1000, while the exact G100 model in the real aircraft may be different. More differenced may be found too, such as the engine's analog gauges that may not exist along with a G1000 or similar configurations. There are many P2006T cockpit configurations out there...the VSKYLABS P2006T is one among these several. Thanks for reaching out!
|
|
|
Post by hailstone on Oct 7, 2018 22:19:31 GMT
Any chance for fire alarm test and warning in G1000? I guess it's X-Plane dependend, so not much can be done here...
Another observation is that there is no reaction on carb heat regarding the RPM (no drop when carb on).
|
|
|
Post by lilins on Oct 11, 2018 8:08:40 GMT
Hi do the latest vesion allow modification of this file in liveries? I made my greens on my livery but up until now i need to backup and replace the original file in the top folder Also on Lua Script, i try to link a physical button to both fuel pumps, any idea? -- Fuel Pumps switch toggle create_switch(663, "sim/cockpit2/engine/actuators/fuel_pump_on") this only fire up the first fuel pump
|
|
|
Post by VSL-Admin on Oct 11, 2018 8:13:19 GMT
Hi Prop discs are not included in X-Plane's livery system...so you need to change it in the main aircraft folder... In the future - I will consider to replace it with 3D prop discs, and it will allow to add it to the livery folder. But I can't tell exactly when or when I will go for this move, as it has some pros and cons...
|
|
|
Post by lilins on Oct 11, 2018 19:30:55 GMT
thanks for the reply I really love this aircraft and it's my fav GA ^^ I love it even more since i discovered that more and more Pilot Students are learning dual motor, ifr and all the basic they need on these
|
|
|
Post by VSL-Admin on Oct 13, 2018 8:54:05 GMT
Thanks! Yes, it is indeed becoming more and more popular.
|
|